冷鐓鋼用熱軋盤條
| 名稱 |
牌號 |
規格 |
執行標準 |
化學成分分析（熔煉成分）% |
性能特點 |
用途 |
| C |
Si |
Mn |
P ≤ |
S ≤ |
其他 |
| 冷鐓鋼用熱軋盤條 |
SWRCH22A |
F5.5-6.5 |
JIS G3507-1
供貨技術協議 |
0.18-0.23 |
≤0.10 |
0.70-1.00 |
0.030 |
0.035 |
Al≥0.02 |
金相組織好，表面缺陷少，鋼質純凈度高，尺寸精度高，冷鐓開裂率低。產品性能等高于相關標準要求。 |
主要用于各種緊固件、自攻絲、焊釘?shù)雀鞣N標準件。 |
| SWRCH25K |
F5.5-20 |
0.22-0.28 |
0.10-0.35 |
0.30-0.60 |
0.030 |
0.035 |
|
| SWRCH35K |
F5.5-24 |
0.32-0.38 |
0.10-0.35 |
0.60-0.90 |
0.030 |
0.035 |
|
| ML08Al |
F5.5-24 |
GB/T 6478 |
0.05-0.10 |
≤0.10 |
0.30-0.60 |
0.035 |
0.035 |
Al≥0.02 |
| ML40Cr |
F5.5-24 |
0.38-0.43 |
0.10-0.30 |
0.60-0.90 |
0.025 |
0.025 |
Cr 0.90-1.20 |
冷鐓鋼系標準件制造行業所需的主要原材料，產品標準為GB/T6478，用來制作各種規格的螺栓、螺帽、螺釘?shù)裙ぜ４虽摲N由于冷鐓加工過程中變形量大，要求鋼中硫、磷等含量低、雜質少，加工性能和機械性能良好，軋制公差尺寸精確。我公司已能生產出滿足冷鐓用途的冷鐓鋼盤條，生產的ML08、ML35、ML40Cr規格為φ5.5mm～φ16mm。As the main raw material needed by the standard pieces manufacture industries, the cold heading steel, standard executed is GB/T6478—2001, is used to make work pieces in every specification such as bolt, screw, nut etc. Because of the large deformation in the process of cold heading, the steel grade is required to have less content of sulfur and phosphor, less impurity, excellent machining and mechanical performances and accurate rolling tolerances. Our company already could produce the cold heading steel wire coil for cold heading in grade of ML08,ML35 and ML40Cr with diameters range of φ5.5mm～φ16mm.
魯公網安備 37070002370710號
